E30 CNC Cylindrical Lilọ Machine Fun gige irinṣẹ
Aworan ipilẹ akọkọ ti ẹrọ
Ohun elo dopin
Ohun elo ibiti o: milling ojuomi, lu bit, reamer ati orisirisi ga-konge awọn ẹya ara processing.
Ibiti o n ṣiṣẹ: iwọn ila opin ti awọn ọja ti a ṣe ilana: Φ3～Φ20mm, ipari gigun ti awọn ọja ti a ṣe ilana: 120mm (laifọwọyi), 330mm (afọwọṣe).
Awọn abuda ilana: lilọ nigbakanna ti itanran ati awọn kẹkẹ wiwu ilọpo meji, iṣelọpọ akoko kan ati dida.
Ifihan ẹrọ
1. Eto ibusun:
2. Irin dì ti gbogbo ẹrọ: gbogbo ẹrọ naa ni eto ti o wa ni kikun, ati pe fireemu akọkọ ti ya sọtọ lati ideri ita lati yago fun gbigbọn.
3. Iṣakoso eto: NEWCON
4. Ilana ti trimming:
• X-axis (ilana lilọ kẹkẹ ẹrọ): ṣe akiyesi iṣipopada ti iṣipopada ti kẹkẹ lilọ kiri ni ọna itọnisọna X-axis;
• V-axis (pipasẹ kẹkẹ ti o dara to dara): ṣe akiyesi iṣipopada atunṣe ti kẹkẹ fifun ti o dara ni itọsọna V-axis;
• Y-axis (ọna ẹrọ ifunni Y-axis): ṣe akiyesi iṣipopada atunṣe ti tabili iṣẹ ni itọsọna Y-axis;
• C axis (ṣiṣẹ ori yiyi siseto): mọ iṣipopada iyipo ti ori iṣẹ ni itọsọna ti C axis:;
• UL axis, VL axis ati WL axis (manipulator pick-and-place method): ṣe akiyesi iṣipopada atunṣe ti ifọwọyi ni awọn itọnisọna petele ati inaro;
• kẹkẹ Itọsọna ati V-block support: Iranlọwọ si Ipari ti machining.
1. Gbigbe awọn ẹya ara: X axis, V axis, Y axis, WL axis, UL axis, VL axis, ilana kẹkẹ itọnisọna, ilana apa, ilana atunṣe hysteresis
2. Workpiece spindle: Chuangyun ara-ṣe spindle
3. lilọ spindle: Xiamen Tungsten Motor
4. Lubrication ti gbogbo ẹrọ: awọn ọmu epo ti wa ni ipamọ fun ipo kọọkan ati lubricated nigbagbogbo
5. Ọna ifunni: ifunni ifọwọyi onipo mẹta
Imọ ni pato
| ọna iṣakoso | Awọn bọtini ita, iboju ifọwọkan | |
| Ọna ifihan | Iboju ifọwọkan, ina ikilọ | |
| ọna itutu | Opo epo | |
| ọna gbigbe | Hydraulic, pneumatic, servo motor | |
| ibi ti ina elekitiriki ti nwa | AC 3×380V,50Hz | |
| O pọju lapapọ agbara | 25KW | |
| Awọn iwọn | 2152× 1838×2614 mm | |
| iwon girosi | 3050kg | |
| Itutu epo titẹ | 0.6 ~ 0.8MPa | |
| barometric titẹ | Lapapọ titẹ opopona: 5 ~ 6Bar | |
| Chuck air titẹ: 2 ~ 3Bar | ||
| Itọsọna kẹkẹ afẹfẹ titẹ: 2 ~ 2.5Bar | ||
| Gripper titẹ ọna afẹfẹ: 1.5 ~ 4Bar | ||
| Apa afẹfẹ titẹ: 5 ~ 6Bar | ||
| Opitika asekale ninu air titẹ: 0.6 ~ 0.7Bar | ||
| paramita Manipulator | ||
| UL ipo | Irin-ajo | 450mm |
| Atunṣe | 0.02mm | |
| Iyara iṣẹ ṣiṣe ti o pọju | 15000mm/min | |
| VL ipo | Irin-ajo | 100mm |
| Atunṣe | 0.02mm | |
| Iyara iṣẹ ṣiṣe ti o pọju | 15000mm/min | |
| WL ipo | Irin-ajo | 540mm |
| Atunṣe | 0.02mm | |
| Iyara iṣẹ ṣiṣe ti o pọju | 15000mm/min | |
| Ilana axis paramita | ||
| Y igun | Irin-ajo | 350mm |
| Yiye Ipinnu ti o kere julọ | 0.0001mm | |
| Iwọn X | Irin-ajo | 35mm |
| Yiye Ipinnu ti o kere julọ | 0.0001mm | |
| V ipo | Irin-ajo | 35mm |
| Yiye Ipinnu ti o kere julọ | 0.0001mm | |
| kẹkẹ Itọsọna | Yiyi deedee: | ≤0.010mm |
| Ori ti n ṣiṣẹ (apa C) | Agbara mọto | 1.57Kw |
| Iyara yiyipo | 2000rpm | |
| Runout išedede | ≤0.002mm | |
| ipinnu to kere julọ | 0.0001° | |
| Ti o ni inira lilọ kẹkẹ spindle | Agbara mọto | 8.5KW |
| Iyara yiyipo | ≤5000rpm | |
| Runout išedede | ≤0.002mm | |
| iwontunwonsi ìmúdàgba | ≤G0.4 | |
| Fine lilọ kẹkẹ spindle | Agbara mọto | 1.4KW |
| Iyara yiyipo | 7950rpm | |
| Runout išedede | ≤0.002mm | |
| iwontunwonsi ìmúdàgba | ≤G0.4 | |
| Awọn paramita lilọ |
|
|
| Chuck awoṣe | W20 | |
| Isokuso lilọ kẹkẹ opin | Ø250mm | |
| Fine lilọ kẹkẹ opin | Ø150mm | |
| Workpiece Shank Diamita | Ø3-Ø12mm (laifọwọyi) / Ø3-Ø20mm (afọwọṣe) | |
| Workpiece Lilọ Range | Ø0.08 - Ø20mm | |
| workpiece ipari | 120mm (laifọwọyi) / 350mm (afọwọṣe) | |
| Awọn ti o pọju processing ipari ti awọn workpiece | 330mm | |
| Processing lode opin runout | ≤0.003mm | |
| Gigun machining išedede | ± 0.1mm | |
| Angle machining išedede | ≤0.3° | |
| Ipeye ifarahan | ≤Ra0.4 (lilọ pari) | |
Standard iṣeto ni akojọ
| 10 | CNC eto | NEWC0N | 1 |
| 20 | servo motor | NEWC0N | 8 |
| 30 | server Driver | NEWC0N | 4 |
| 40 | Isẹ nronu / kẹkẹ ọwọ | NEWC0N | 1 |
| 50 | Ga konge ṣiṣẹ ori module | GESAC | 1 |
| 60 | Spindle itanna to gaju (1.4KW) | GESAC | 1 |
| 70 | Mọto pipe to gaju (7.1KW) | GESAC | 1 |
| 80 | Ga konge darí Spindle | GESAC | 1 |
| 90 | Reluwe konge | Schneeberger | 10 |
| 100 | Konge rekoja Roller Linear Way | Schneeberger | 4 |
| 110 | Konge Ball dabaru | NSK | 4 |
| 120 | Sọfitiwia kikopa sisẹ ati sisẹ (iyatọ igbesẹ boṣewa, iyipo, ati bẹbẹ lọ) | GESAC | 1 |
| 130 | Inverter | GESAC | 1 |
| 140 | Inverter | GESAC | 1 |
| 150 | afi ika te | 19ÉLO | 1 |
| 160 | Ẹrọ titii pa ẹnu-ọna aabo ọpa ẹrọ | Jinzhong | 1 |
| 170 | sensọ | Baumer | 3 |
| 180 | sensọ sisan | Yifumen | 1 |
| 190 | Itanna irinše | Schneider | 1 |
| 200 | Awọn ohun elo Pneumatic | CKD | 1 |
| 210 | Waya ati Cable | ComCab | 1 |
| 220 | Agbeko air kondisona | GESAC | 1 |
| 230 | Konge titẹ kẹkẹ Ø92x8 | GESAC | 1 |
| 240 | Konge titẹ kẹkẹ Ø92x15 | GESAC | 1 |
| 250 | Chuck W20 D4 | GESAC | 1 |
| 260 | Standard atẹ D4 | GESAC | 3 |
| 260 | Ga-konge ibaamu V-Block (3-6)*10 | GESAC | 1 |
| 280 | Flange kẹkẹ lilọ pipe to gaju (iru iyipada iyara) | GESAC | 2 |
| 290 | Eto kikun ti awọn ika ọwọ ifọwọyi | GESAC | 1 |
Awọn abuda ẹrọ
Awọn aake CNC 7, awọn aake 4 CNC ni a lo ni agbegbe iṣelọpọ, eyiti o le mọ ikojọpọ laifọwọyi ati gbigbejade, iṣelọpọ ipele ti ko ni eniyan
Ṣiṣe deede ati ṣiṣe ti awọn irinṣẹ ẹrọ
1. Awọn radial runout ti awọn workpiece ni laarin 0.003mm;
2. Awọn išedede ti iwọn 2.0 ti wa ni iṣakoso laarin ± 0.005mm;
3. Awọn iyipo ti awọn workpiece ni laarin 0.003mm;
4. Iwaju oju oju <Ra0.4;
