Marun-axis gantry machining aarin PM-U jara
Awọn ẹya ara ẹrọ
Awọn ọja jara yii jẹ idagbasoke ti ara ẹni ti o wa titi tan ina marun-axis gantry machining ile-iṣẹ pẹlu ọna iwapọ, iṣẹ ṣiṣe ti o dara julọ, iyara giga, pipe giga, rigidity giga, bbl O dara fun awọn ẹya ẹrọ ni ọpọlọpọ awọn ile-iṣẹ bii afẹfẹ, ẹrọ imọ-ẹrọ, gbigbe ọkọ oju-irin, awọn apẹrẹ pipe, agbara afẹfẹ, ati bẹbẹ lọ.
PM-U jara
O gba iyara-giga ati giga-giga A / C ilọpo ilọpo meji ati pe o ni ipese pẹlu ọpa ina mọnamọna giga-giga ati iyipo giga, eyiti o ni agbara gige ti o lagbara.
A/C ė golifu ori
O gba agbewọle giga-konge, awọn olori golifu ilọpo meji ti o ni agbara ati pe o ni ipese pẹlu iyara giga kan, ọpa ina mọnamọna to gaju, pade awọn ibeere giga fun konge paati, didara dada, ati ṣiṣe ṣiṣe.
Ga rigidity be iṣapeye oniru
Awọn ọna apẹrẹ eroja ti o pari ni a lo lati ṣe aimi ati awọn itupalẹ modal ti ọpọlọpọ awọn ẹya ti awọnẹrọlati mu ilọsiwaju ọja siwaju sii ati ṣaṣeyọri lile-giga ati apẹrẹ igbekalẹ iwuwo fẹẹrẹ.
Dabaru support be
Awọn gun-ajoskru asiwaju ti ni ipese pẹlu atilẹyin lilefoofo, eyiti o le ṣe imunadoko ni ilọsiwaju iyara iye to ti dabaru asiwaju ati iduroṣinṣin ti yiyi iyara to gaju.
Iwe irohin irinṣẹ
Awọn oriṣi awọn iwe irohin irinṣẹ, 24/32/40/60, wa lati kuru awọn wakati ṣiṣe ẹrọ iranlọwọ ni imunadoko.
Ga rigidity support
Awọnẹrọibusun ti ni ipese pẹlu awọn itọsọna iwọn-nla mẹta, eyiti o pese iduroṣinṣin atilẹyin to ati idaduro pipe.
Humanized ailewu oniru
Awọn dì irin labyrinth oniru ni isalẹ ti awọnworktableidilọwọ awọn irin awọn eerun lati titẹ awọnẹrọibusun. Awọn ese ni ërún yiyọ trough Pataki ti jade ni isoro ti omi jijo.
Imọ ni pato
| Nkan | Ẹyọ | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Iwọn ilana |
|
|
|
|
|
| X/Y/Z irin ajo aksi | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| A/C aksi yiyi ibiti | ° | ± 105 / 360 | ± 105 / 360 | ± 105 / 360 | ± 105 / 360 |
| Gantry munadoko iwọn | mm | 2800 | 2800 | 2800 | 3300 |
| Ijinna lati spindle imu to worktable | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| tabili iṣẹ |
|
|
|
|
|
| Worktable mefa | mm | 2000×3000 | 2000×4000 | 2000×6000 | 2500×4000 |
| Worktable fifuye agbara | t | 16 | 20 | 26 | 22 |
| T-Iho ni pato | mm | 28 | 28 | 28 | 28 |
| Wakọ kikọ sii |
|
|
|
|
|
| O pọju. iyara kikọ sii X/Y/Z | m/min | 12/12/12 | 12/12/12 | 12/12/12 | 10/10/10 |
| O pọju. iyara kikọ sii A/C | rpm | 60 | 60 | 60 | 60 |
| Iyara iyara X/Y/Z | m/min | 20/20/15 | 20/20/15 | 15/20/15 | 15/15/15 |
| Iyara iyara A/C | rpm | 100 | 100 | 100 | 100 |
| Spindle |
|
|
|
|
|
| Ọna wiwakọ |
| Electric spindle | Electric spindle | Electric spindle | Electric spindle |
| O pọju. spindle iyara | rpm | 7000 | 7000 | 7000 | 7000 |
| Agbara Spindle (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Yiyi Spindle (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Spindle taper |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Iwe irohin irinṣẹ (aṣayan) |
|
|
|
|
|
| Ọpa irohin agbara | T | 24 | 24 | 24 | 24 |
| Irin dimu iru |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| O pọju. opin ọpa | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| O pọju. ọpa ipari | mm | 350 | 350 | 350 | 350 |
| O pọju. àdánù ọpa | kg | 20 | 20 | 20 | 20 |
| Yiye |
|
|
|
|
|
| Ipo deede X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| Atunṣe X/Y/Z | mm | 0.012 / 0.012 / 0.010 | 0.012 / 0.012 / 0.010 | 0.018/0.012/0.010 | 0.012 / 0.012 / 0.010 |
| Awọn miiran |
|
|
|
|
|
| Iwọn ẹrọ | t | 57 | 63 | 75 | 70 |
| Iwọn ẹrọ (L× W × H) | cm | 910×670×650 | 1110×670×650 | 1510×670×650 | 1110×720×650 |
| Nkan | Ẹyọ | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Iwọn ilana |
|
|
|
|
|
| X/Y/Z irin ajo aksi | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| A/C aksi yiyi ibiti | ° | ± 105 / 360 | ± 105 / 360 | ± 105 / 360 | ± 105 / 360 |
| Gantry munadoko iwọn | mm | 3300 | 3300 | 3800 | 3800 |
| Ijinna lati spindle imu to worktable | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| tabili iṣẹ |
|
|
|
|
|
| Worktable mefa | mm | 2500×6000 | 2500×8000 | 3000×6000 | 3000×8000 |
| Worktable fifuye agbara | t | 30 | 35 | 35 | 40 |
| T-Iho ni pato | mm | 28 | 28 | 28 | 28 |
| Wakọ kikọ sii |
|
|
|
|
|
| O pọju. iyara kikọ sii X/Y/Z | m/min | 8/10/10 | 8/10/10 | 8/10/10 | 8/10/10 |
| O pọju. iyara kikọ sii A/C | rpm | 60 | 60 | 60 | 60 |
| Iyara iyara X/Y/Z | m/min | 12/15/15 | 10/15/15 | 12/15/15 | 10/15/15 |
| Iyara iyara A/C | rpm | 100 | 100 | 100 | 100 |
| Spindle |
|
|
|
|
|
| Ọna wiwakọ |
| Electric spindle | Electric spindle | Electric spindle | Electric spindle |
| O pọju. spindle iyara | rpm | 7000 | 7000 | 7000 | 7000 |
| Agbara Spindle (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Yiyi Spindle (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Spindle taper |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Iwe irohin irinṣẹ (aṣayan) |
|
|
|
|
|
| Ọpa irohin agbara | T | 24 | 24 | 24 | 24 |
| Irin dimu iru |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| O pọju. opin ọpa | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| O pọju. ọpa ipari | mm | 350 | 350 | 350 | 350 |
| O pọju. àdánù ọpa | kg | 20 | 20 | 20 | 20 |
| Yiye |
|
|
|
|
|
| Ipo deede X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Atunṣe X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Awọn miiran |
|
|
|
|
|
| Iwọn ẹrọ | t | 84 | 100 | 94 | 115 |
| Iwọn ẹrọ (L× W × H) | cm | 1550×720×650 | 2050×720×650 | 1550×800×650 | 2050×800×650 |
